800-379-8493 • 410-863-1700 • sales@dcscientific.com

L-K Centrifuges, Baths, and Heaters

Benchmark C Oilfield Centrifuge
The state of the art Benchmark Series is the first oilfield centrifuge with Class I, Division 2 certification. The fully insulated centrifuge is perfect for laboratory settings or refineries using long cone (C) or short cone (D) tube configurations. With an all new motor capable of 2300 RPM’s and real temperature readings, this unit has unmatched precision.
• High speed capability (2300 RPM) – More experimentation and testing ability= Better data
• Digital temperature control. (Ambient to 200?F) – Better process control for testing heavy crude oil
• Integrated timer – Reduces variation in testing
• Internal motor control – Linear acceleration results in more consistent testing
• Specifically designed collars and cushions – Less tube breakage at higher G-forces

Benchmark S Manual Heated Laboratory Centrifuge
The Benchmark S Manual Heated Centrifuge is intended for general use in test laboratories and refineries, where Class I, Division 2 certification is not required. It operates on 120/240VAC, and comes completely assembled and ready for installation. A power cord can be purchased separately if the unit will not be hard-wired. It is recommended to keep the custom packaging materials for future shipping or storage. For best results, the centrifuge should be housed in a controlled environment. Exposure to solvents (i.e. toluene) may degrade the sealing properties of materials used in the front panel switches. This centrifuge is designed to minimize operator injury and includes a lockable sliding door for safe operation. Carefully following safety guidelines and knowing the limits of this unit will help prevent accidents.

Melton Setting Centrifuge
This one of a kind unit offers heated cups for oil samples. This unit can be used with A, B, C, D or E tube models and is designed with a built in mechanical tachometer for easy RPM readings.

Criterion Water Bath
This unit is designed to meet the needs of lab operators focused on the precise heating of solvents and samples. The unit will hold 2 one gallon bottles of solvent and fourteen long cone C or 12 short cone D centrifuge tubes. The unit is set to heat to 140°F (60°C) and maintain that temperature with unrivaled precision.

Trademark Heater
This unit is a Class 1, Division 2 certified dry bath built for labora- tory use. An LCD screen monitors the temperature accurately and is adjustable 72°F to 250°F. The tube configurations A, B, C, or D are available for this unit. This non-certified-explosion resistant sample heater was built for laboratory settings. The unit can be configured to a 4-place or 8-place, depending on the tube model. Tube models A, B, C, and D are available.

DCS Low-Temperature Circulating BathDownloadable PDF

Part No. Description
00000 Benchmark C Oilfield Centrifuge
00000 Benchmark S Manual Heated Laboratory Centrifuge
00000 Melton Setting Centrifuge
00000 Melton Setting Centrifuge
00000 Criterion Water Bath
00000 Trademark Heater
00000 Trademark Heater

Back to Top